Delock Slot bracket 1 x 19 pin USB 3.1 pin header female internal > 1 x USB Type-C™ female + 1 x USB Type-A female external
Description
This slot bracket by Delock expands the PC by one external USB Type-C™ port and one USB Type-A port. The cable of the slot bracket can be connected internally to the motherboard with a 19 pin USB 3.1 pin header. Thus the internal connection will be lead outside, in order to connect devices with USB Type-C™ and USB Type-A connector to the computer.
Note
For the connection of two USB devices at once, which need more than 750 mA each, an additional power supply is necessary.
Technical details
- Connector:
internal:
1 x 19 pin SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) pin header female
external:
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) USB Type-C™ female
1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A female - Pitch distance: 2.00 mm
- Screw type: M3
- Cable gauge:
28 AWG data line
24 AWG power line - Cable diameter: ca. 5.5 mm
- Data transfer rate up to:
SuperSpeed USB 10 Gbps,
SuperSpeed USB 5 Gbps,
Hi-Speed 480 Mbps,
Full-Speed 12 Mbps,
Low-Speed 1.5 Mbps - Backward compatible to 19 pin USB 3.0 pin header with a data transfer rate of up to 5
Gbps - Power output: max. 1.5 A
- Voltage: 5 V
- Slot bracket: standard
- Cable colour: blue
- Cable length incl. connector: ca. 30 cm
System requirements
- PC with one free slot
- Mainboard with a free 19 pin USB 3.1 pin header male
Package content
- Slot bracket
Package
- Zip poly bag
Here you can find information about USB Type-C™ + USB 5/10/20 Gbps
Interface
External
• 1 x USB 10 Gbps USB Type-C™ female
• 1 x USB 10 Gbps Type-A female
• 1 x USB 10 Gbps Type-A female
Internal
• 1 x 19 pin USB 5 Gbps pin header female
Technical characteristics
Data transfer rate
• SuperSpeed USB 10 Gbps
Physical characteristics
Pitch distance
• 2.00 mm
Cable colour
• blue
Cable length
• 30 cm
Conductor gauge
• 28 AWG data line
• 24 AWG power line
• 24 AWG power line
Screw type
• M3
Slot bracket
• standard