Delock Converter IDE 40 pin > 2 x SATA HDD
Description
This converter by Delock enables the connection of two SATA HDDs via 40 pin IDE interface. The converter can be plugged onto the 40 pin male port of the motherboard and does not require any driver installation. Furthermore the SATA HDDs can be set to Master and Slave.
Note
2 SATA HDDs need to be connected!
When using the 2 SATA HDD in Slave mode, please arrange the setting in the Bios.
When using the 2 SATA HDD in Master mode, the jumper needs to be set accordingly.
Technical details
- Connectors:
1 x IDE 40 pin female >
2 x SATA 7 pin plug - Supports ATA 100/133
- SATA HDD setting for Master and Slave
- OS independent, no driver installation necessary
System requirements
- Motherboard with 40 pin IDE male connector
Package content
- Converter IDE > SATA
Package
- Poly bag
When has the Jumper to be set?
SATA HDDs do not have any jumper settings in general. The converter acts as IDE HDD. If you want to add more IDE HDDs, the system needs to know if the converter should operate as Master or Slave.
The jumper setting is not related to the connected SATA HDD.
The jumper setting is not related to the connected SATA HDD.